news

Home >> news

Seven common appearance defects of square and rectangular steel strips
Seven common appearance defects of square and rectangular steel strips

(1) Wave bendIt is the phenomenon that the edge part of the strip is repeatedly bent along the longitudinal direction, which is caused by the uneven deformation of the center and edge along the width direction during strip rolling. Wavy bends will cause serious lap welding during the forming and wel

Learn More
Nine connection methods of square and rectangular tubes
Nine connection methods of square and rectangular tubes

(1) CompressionInsert the square tubeinto the nozzle, fasten it with a nut, and use the screw force to compress the casing at the nozzle part through the sealing ring to play a sealing role and complete the connection of the square tube.(2) Quick connect flange typeRing-shaped argon arc weldin

Learn More
Several points that must be known about square rectangular tube quenching
Several points that must be known about square rectangular tube quenching

When the square tube is quenched, the following points should be paid attention to:(1) The slender pipe should be hung vertically in the salt bath furnace or pit furnace for heating to reduce the deformation caused by its own weight.(2) When pipe fittings with different cross-sectional sizes are hea

Learn More
Five points that should be paid attention to in phosphating treatment of square rectangular tube
Five points that should be paid attention to in phosphating treatment of square rectangular tube

Phosphating is a process in which chemical and electrochemical reactions form a phosphate conversion film, and the formed phosphate conversion film is referred to as a phosphating film. It can play a big role in improving the rust resistance of square and rectangular tubes. When we phosphate the rec

Learn More